Canada Drone Aerospace Centre

JET ENGINE DESIGN AN DEVELOPMENT COURSE IN VANCOUVER, CANADA BY DR. QURESHI
2025-05-19 - 2025-05-24
JET ENGINE DESIGN AN DEVELOPMENT COURSE IN VANCOUVER, CANADA BY DR. SARAH QURESHI. PLEASE EMAIL US FOR COURSE INFORMATION TO admission@canadadroneaerospacecentre.com

LEARN TO DESIGN, ASSEMBLE, BUILD AND TEST VTOL AND FIXED-WING UAV IN DUBAI AND JORDAN
2025-05-18 - 2025-05-31
LEARN TO DESIGN, ASSEMBLE, BUILD AND TEST VTOLAND FIXED-WING UAVs IN DUBAI, UAE
Length: 10 days
Location: Dubai, UAE.
In this workshop you will learn how to build your own UAV Prototypes. Please email for details to admission@canadadroneaerpspacecentre.com

LEARN TO DESIGN, ASSMBLE, BUILD AND TEST VTOL AND FIXED-WING UAVs IN VANCOUVER, CANADA
2025-05-03 - 2025-05-13
Title:
VTOL AND FIXED-WING UAV CONSTRUCTION WORKSHOPS | DESIGN YOUR OWN UAVS
Length: 10 DAYS INSTRUCTOR-LED HANDS-ON TRAINING
Fees: Please contact us.
OBJECTIVES:
After taking this course participants will be able to design, build, assemble and test VTOL and Fixed-Wing drone Prototypes.
COURSE OUTLINE:
Day – 1:
Introduction to drone design fundamentals: aerodynamics, weight distribution, and power systems.
Introduction to CAD software (e.g., SW Maker) for designing a fixed-wing airframe.
Day – 2:
Advanced CAD design and refining the airframe structure.
Introduction to the Cube Orange flight controller and its features (with ADS-B).
Day – 3:
Assembly of the fixed-wing airframe, including motor, servo installation, and control surface setup.
Day – 4):
Integration of electronics: Cube Orange, GPS, telemetry systems, and Foxtech Map-A7R Pro camera.
Sensor calibration (GPS, airspeed, barometer, and IMU).
Day – 5:
Programming the Cube Orange with ArduPlane for fixed-wing functionality.
Initial flight testing and troubleshooting.
Week 2: VTOL Drone Build and Advanced Testing
Day – 6:
Introduction to VTOL drone design principles and the differences from fixed-wing.
Assembly of the VTOL airframe: motor installation and servo setup for VTOL transitions.
Day – 7:
Integration of Cube Orange, GPS, telemetry systems, and Foxtech Map-A7R Pro camera for VTOL.
Calibration of servos and VTOL-specific control surfaces.
Day – 8:
Programming the Cube Orange with ArduPlane for VTOL functionality.
Sensor calibration and preliminary testing.
Day – 9:
Advanced flight testing for both drones (fixed-wing and VTOL).
Mission planning: autonomous waypoint navigation and camera integration.
Day – 10:
Final testing and participant-led demonstrations.
Q&A session and troubleshooting best practices.

DRONE MAINTENANCE, REPAIR AND OVERHAULL (MRO) COURSE IN DUBAI AND JORDAN
2025-04-06 - 2025-04-10
Description:
This course is designed for beginners and basic technicians. Course covers Remotely Piloted Aircraft Systems (RPAS) instrument, electrical and avionics mechanics, installation, repair and overhaul aircraft instrument, electrical or avionics systems maintenance. This course also includes avionics testing and inspection, electrical and avionics systems following assembly, modification, Maintenance, Repair and Overhaul (MRO).
Topics:
Day- 1:
1. RPAS Mechanics:
– Repair and overhaul, installation, calibration and testing aircraft instruments.
Day – 2:
2. RPAS Electrical System:
– Repair and overhaul, modification, installation and testing aircraft electrical systems and equipment.
Day – 3:
3. RPAS Repair:
– Troubleshooting, repairing and overhaul, testing, modification, installation and inspecting aircraft electronic systems and components including communications, navigational, and auto-flight equipment.
Day – 4:
4. RPAS Inspection and testing:
– Inspection and testing of aircraft instrument, electrical and avionics systems and ensure that the installation, maintenance, repair and overhaul of these systems meet performance and safety standards.
Day – 5:
5. Drone Motherboard and Circuit Boards Repair:
Soldering, troubleshooting, diagnostics and repair or replacement of drone Motherboards.
Who should attend:
Field Service Technicians, Engineers, Drone Technicians from Law Enforcement, Police, Department of Defense and Air Force, Business Owners, start ups and beginners.
General information:
Length: 5 days, 9am to 5pm class, 8 hours per day, total 40 hours.
Fee: US$ 2,500/ attendee
Group Discount; A group discount is offered, if you register 2 attendees the 3rd attendee is free. A Special discount is offered for a group of 10 people.
Equipment usage: Oscilloscope, digital multi meters, Volt meter, bench Power supply, soldering equipment, hand tools etc.,all equipment provided in the class.
Practice drones: 2 drones, (one UAV and one DJI Enterprise) provided for hands-on exercises and demos. Additional drones can be added upon requests and additional charge.
Opening tools: provided free in the class
Locations: Canada, USA, Middle East, GCC, MENA and on-site at clients locations.
Certificates: Institute of Electronics and Electrical Engineers (IEEE) USA provide Certificates, a small price of US$75/ attendee will be charge. Free CDAC Certificates will be awarded.

DRONE MAINTENANCE, REPAIR AND OVERHAUL (MRO) TRAINING WORKSHOPS IN VANCOUVER, CANADA
2025-03-17 08:00 - 2025-03-21 17:00 UTC

LEARN TO DESIGN, ASSENBLE, BUILD AND TEST VTOL AND FIXED-WING UAVs IN VANCOUVER
2025-03-10 08:00 - 2025-03-15 17:00
LEARN TO DESIGN, ASSEMBLE, BUILD AND TEST VTOLAND FIXED-WING UAVs IN VANCOUVER, CANADA.
Length: 10 days
Location: Dubai, UAE.
In this workshop you will learn how to build your own UAV Prototypes. Please email for details to admission@canadadroneaerpspacecentre.com

Drone Pilot Program - Dubai and Egypt
2025-02-10 - 2025-02-14
32- hour In-person Flight Training which covers the following areas:
​a. Basic flight Maneuvers;b. Advanced flight Maneuvers;c. Mission Planning;d. Preparation and practice for Flight Review.e. ROC-A Training and examination services.f. Flight Review.g: Electronic documents included, sent by e-mail along with the course joining instructions: Mini4 Pro Checklist, Checklist including Emergency checklist; Pilot Logbook; and, Weather Decoders.
​The course includes a drone
a. DJI MINI 4 PRO FLY MORE COMBO PLUS (DJI RC 2) 1 x DJI RC 2 Remote controller3 X Intelligent flight battery Plus1 x Two way Charging Huband 1 x Shoulder bag*** Please note the Care Refresh warranty is an optional purchase made directly through DJI once the drone is activated.
*Note 1 – TP15263E – Knowledge Requirements for the Pilots Remotely Piloted Aircraft Systems 250 g up to and including 25 kg Operating within Visual Line-of-Sight (VLOS)
Price: Please contact us.

RPAS Avionics Systems Technician Course, in Vancouver and Toronto
2025-01-27 - 2025-01-30
RPAS Avionics Systems Technician Course

Description:
This course is designed for beginners and basic technicians. The course covers Remotely Piloted Aircraft Systems (RPAS) instrument, electrical and avionics mechanics, installation, repair and overhaul aircraft instrument, electrical or avionics systems maintenance. This course also includes avionics testing and inspection, electrical and avionics systems following assembly, modification, repair or overhaul.
Topics:
Day- 1:
1. RPAS Mechanics:
– Repair and overhaul, installation, calibration and testing aircraft instruments.
Day – 2:
2. RPAS Electrical System:
– Repair and overhaul, modification, installation and testing aircraft electrical systems and equipment.
Day – 3:
3. RPAS Repair:
– Troubleshooting, repairing and overhaul, testing, modification, installation and inspecting aircraft electronic systems and components including communications, navigational, and auto-flight equipment.
Day – 4:
4. RPAS Inspection and testing:
– Inspection and testing of aircraft instrument, electrical and avionics systems and ensure that the installation, maintenance, repair and overhaul of these systems meet performance and safety standards.
Day – 5:
5. Drone Motherboard/ Circuit Board repairs, soldering and troubleshooting.
Who should attend:
– Field Service Technicians, Engineers, Drone Technicians, DoD and Air Force Technicians and beginners.
General information:
Length and Fee: Basic course 3-days (Day 1 to Day 3), Fee: CAD$ 3000/ attendee
Advanced course, 5 days (Day 1 to Day 5), fee: CAD $4000/ attendee.
Equipment: Oscilloscope, digital multi meters, Volt meter, bench Power supply, soldering equipment etc.,
Opening tools: provided free in the course
Location: Canada
Certificates: Institute of Electronics and Electrical Engineers (IEEE) Certificates can be awarded with a small price. Free CDAC Certificates will be awarded.

Drone Master Technician course
2025-01-27 - 2025-01-29

UAV Ground Control Station Deployment, Repair, Maintenance and Configuration Courses in Vancouver and Toronto
2025-01-13 - 2025-01-17
Drone Ground Equipment Repair Courses in Vancouver and Toronto
Please email for more information
Deployment, repair and maintenance of Ground Control Stations (GCS) for UAV, Drones, UAS, RPAS and UGV. Rugged, portable and universal GCS for a range of applications. Hardware, software configurations.

DRONE MASTER TECHNICIAN COURSE IN TORONTO
2024-12-14 - 2024-12-18, 2024-11-08 - 2024-11-11
DRONE MASTER TECHNICIAN COURSE
DJI Enterprise Drone Repair Training
DJI Enterprise Drone Repair Training Workshop
CDAC deliver DJI Enterprise Drone Repair and Maintenance Training to beginners in Governments, Defence, Law Enforcement, Police, Security and Surveillance, and Corporations in various sectors such as Oil and Gas and Construction. Course includes general repair and maintenance procedures such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers, camera and sensors and landing gears, check out complete outline below.
Length: 3 TO 5 full days*
Fee: $US3000/ person plus hardware cost, group discount offered.
Setting: Private and in-classroom public workshops.
Course Topics:
– How to conduct an examination and damage assessment
– How to dismantle an aircraft
– How to reassemble an aircraft
– Checking if drone working
– Troubleshooting – electronics components and mechanical parts
– Conducting calibration
– Testing
Tools:
All opening tools are included in the fee.
Equipment use:
Equipment provided if any
Hardware and Software:
Provided including a laptop and software
Location: Toronto
CDAC Certificates:
Drone Master Technician Certificates Awarded
IEEE Certificates:
Institute of Electronics and Electrical Engineers (IEEE) Certificates Awarded, some restriction apply.
*3 days course for hands-on training of 2 drones. 5 days course for hands-on training on 5 or more drones.

DRONE MASTER TECHNICIAN COURSE
2024-10-07 08:00 - 2024-10-09 17:00
DJI Enterprise Drone Repair Training Workshop
CDAC deliver DJI Enterprise Drone Repair and Maintenance Training to beginners in Governments, Defence, Law Enforcement, Police, Security and Surveillance, and Corporations in various sectors such as Oil and Gas and Construction. Course includes general repair and maintenance procedures such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers, camera and sensors and landing gears, check out complete outline below.
Length: 3 TO 5 full days*
Fee: $US3000/ person plus hardware cost, group discount offered.
Setting: Private and in-classroom public workshops.
Course Topics:
– How to conduct an examination and damage assessment
– How to dismantle an aircraft
– How to reassemble an aircraft
– Checking if drone working
– Troubleshooting – electronics components and mechanical parts
– Conducting calibration
– Testing
Tools:
All opening tools are included in the fee.
Equipment use:
Equipment provided if any
Hardware and Software:
Provided including a laptop and software
Location: Toronto
CDAC Certificates:
Drone Master Technician Certificates Awarded
IEEE Certificates:
Institute of Electronics and Electrical Engineers (IEEE) Certificates Awarded, some restriction apply.
*3 days course for hands-on training of 2 drones. 5 days course for hands-on training on 5 or more drones.

DRONE MASTER TECHNICIAN COURSE
2024-09-09 - 2024-09-13
DRONE MASTER TECHNICIAN COURSE
DJI Enterprise Drone Repair Training
CDAC deliver DJI Enterprise Drone Repair and Maintenance Training to beginners in Governments, Law Enforcement, Police and Corporations in various sectors such as Oil and Gas and Construction. Course includes general repair and maintenance procedures such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers, camera and sensors and landing gears etc.,
Length: 3 TO 5 full days*
Fee: $US3000/ person plus hardware cost, group discount offered.
Setting: Private and in-classroom public workshops.
Course Topics:
– How to conduct an examination and damage assessment
– How to dismantle an aircraft
– How to reassemble an aircraft
– Checking if drone working
– Troubleshooting – electronics components and mechanical parts
– Conducting calibration
– Testing
Tools:
All opening tools are included in the fee.
Equipment use:
Equipment provided if any
Hardware and Software:
Provided including a laptop and software
CDAC Certificates:
Drone Master Technician Certificates Awarded
IEEE Certificates:
Institute of Electronics and Electrical Engineers (IEEE) Certificates may be Awarded, some restriction apply.
*3 days course, hands-on training of 2 drones. 5 days course, hands-on training on 5 or more drones.

DRONE MASTER TECHNICIAN COURSE IN TORONTO, CANADA
2024-09-02 - 2024-09-06, 2024-08-05 08:00 - 2024-08-09 17:00, 2024-07-01 - 2024-07-05, 2024-06-03 - 2024-06-07
Enterprise Drone Repair Training Workshop

CDAC deliver Enterprise Drone Repair and Maintenance Training to Governments, Police, law Enforcement, and Corporations in various sectors such as Security and Surveillance, Oil and Gas and Construction. Course includes general maintenance such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers and landing gears etc.
Length: 5 days
Fee: $US3000/ person plus hardware cost
Setting: Private and in-classroom public workshops.
Topics:

General maintenance such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers and landing gears etc.
Troubleshooting techniques
Repair techniques

COMMERCIAL DRONE CONSTRUCTION, ENGINEERING AND DESIGN WORKSHOP IN-PERSON AND ONLINE.
2024-07-15 - 2024-07-28, 2024-05-27 - 2024-06-09
COMMERCIAL DRONE CONSTRUCTION, ENGINEERING AND DESIGN WORKSHOP IN-PERSON AND ONLINE.
This course offers drone construction curriculum, technical hands-on training and know-how for building and designing drones, prototyping, ground station control, firmware and software, communication systems, debugging and simulations, and testing. Mentorship includes step-by-step training for building a complete commercial and autonomous multirotor or VTOL drone project. The UAV applications will include but are not limited to Security and Surveillance drones, agriculture drones, delivery drones (medical or food supplies), mapping and surveying drones, and drones operating in harsh and difficult environments for data gathering.
Length: 10 to 30 hours
Fee: US$3000 plus drone kits
Setting: Private, one-on-one and in-classroom Public courses offered.
Locations: Online or In-classroom in Toronto, Calgary, or Vancouver, Canada.
Topics:
Communications Systems
Communication systems for any type of robotics application is its core part. The attendees will learn short and long-range P2P data and video link communications between the ground control station and drone. This also includes 4G/5G communications systems. Radiofrequency propagation methods for transmission and reception of various aviation communication and data link systems will be covered.
Ground Control Station
Just like the aircraft pilots operate the airplane from the cockpit, the drone pilots and operators control the drone telemetry and flight computers from the ground. In this session, attendees will learn various types of open-source ground stations available, the best option to choose from and how to use them. The attendees will learn how to build ground station whether a cloud-based station or a smartphone application like DJI. They will learn various types of communication systems being used and how to decode them.
Drone Firmware and Software
AI-based systems are main requirement for any robotic project and product out there. This course includes Autonomous and AI-based mission planning systems for the urban, forest, and mountain areas and regeneration of environment with point cloud data. Software development will also include an obstacle avoidance system, precision landing system for indoor and outdoor applications, Simultaneous localization, and mapping for indoor and outdoor applications.
Debugging and Simulation
Like any other software on the market, there is a lot of debugging and testing involve with drone software applications. Before taking out drone for the first test flight, we test the hardware and software operations in a simulating environment. Simulation involves basic flight tests and sensors to completely autonomous flight obstacle avoidance and precision landing.
Testing
Simple laboratory test equipment will be used such as digital multimeter, power supply, and soldering station. Advanced test equipment can be used for large projects such as oscilloscopes, signal/waveform generators, and spectrum analyzers.

DRONE MASTER TECHNICIAN COURSE
2024-07-13 - 2024-07-15
DRONE MASTER TECHNICIAN COURSE
DJI Enterprise Drone Repair Training
CDAC deliver DJI Enterprise Drone Repair and Maintenance Training to beginners in Governments, Defence, Law Enforcement, Police, Security and Surveillances, and Corporations in various sectors such as Oil and Gas and Construction. Course includes general repair and maintenance procedures such as switching out the arms and replacing a motor, antenna, gimbal mount, fans, propellers, camera and sensors and landing gears, complete topics are listed below.
Length: 3 to 5 full days*
Fee: $US3000/ person plus hardware cost, group discount offered.
Setting: Private and in-classroom public workshops.
Course Topics:
– How to conduct an examination and damage assessment
– How to dismantle an aircraft
– How to reassemble an aircraft
– Checking if drone working
– Troubleshooting – electronics components and mechanical parts
– Conducting calibration
– Testing
Tools:
All opening tools are included in the fee.
Equipment use:
Equipment provided if any
Hardware and Software:
Provided including a laptop and software
Location: Toronto, ON, CANADA
CDAC Certificates:
Drone Master Technician Certificates Awarded
IEEE Certificates:
Institute of Electronics and Electrical Engineers (IEEE) Certificates Awarded, some restriction apply.
*training on two drones, 3 days course, training on 3 or more drones 5 days course.

COMMERCIAL DRONE CONSTRUCTION, ENGINEERING AND DESIGN WORKSHOP IN-PERSON AND ONLINE
2024-06-10 - 2024-06-23

DRONE REPAIR TECHNICIAN COURSE IN MISSISSAUGA, ON.
2024-03-11 - 2024-03-15
DRONE REPAIR TECHNICIAN COURSE IN MISSISSAUGA, ON.
LENGTH: 4 days
FEE: CAD$5000 per person.
Please contact for Further information.

DRONE PROTOTYPING WORKSHOPS FOR CONSTRUCTING MULTOCOPTER AND FIXED-WING DRONES IN MISSIAUGA, ON
2024-03-04 - 2024-03-08
DRONE PROTOTYPING WORKSHOPS FOR CONSTRUCTING MULTOCOPTER AND FIXED-WING DRONES IN MISSIAUGA, ON
Length: 5 days (40 hours)
Fee: CAD$3500 Drone Kits: $2000
Please contact us for further information.

DRONE ENGINEERING, DESIGN AND PROTOTYPING COURSES IN CANADA AND ONLINE
2024-02-05 - 2024-02-09
Drone Engineering and Design Workshop
Length basic 4 days (35 hours)
Length: Advanced 5 days (35 hours)
Fee: Please contact (group discount offered)

Introduction to UAV and multicopters (4h)

Introduction to the different types and categories of UAV (fixed-wings, multicopters, VTOL, swarms, etc…)
UAV ecosystem : main protagonists, applications, businesses. Focus on multicopters
Laws and regulations

Drone concept definition (4h)

How to design a drone fitted for a given mission or need ?
Type of actuation, size, payloads, etc…
Hands-on activity : the students will imagine a drone concept based on a need.

Multicopter Mechanical Design (4h)

Goal : understanding the main trade-offs a designer has to take into account when designing a drone : mass, flight time, velocity, robustness, durability,…
Understanding the main challenges to face : vibrations, mechanical constraints, production constraints, prototyping
Electronics and electromagnetic compatibility

Propulsive group design (4h)

Introduction to BLDC motors design and control. How do BLDC motors work, trapezoidal control vs FOC control and other problematics
Propulsive group sizing ; how to avoid under or over-actuated drones, and how to design a coherent propeller-motor duo to make your drone fly as long as possible

Aerodynamics and flight mechanics (4h)

Understanding the basics of aerodynamics : what makes a vehicle aerodynamically efficient, understanding the concepts of drag and lift, Vortex Ring state, etc…
Introduction to flight mechanics : application to airplanes, rockets and multicopters
How to design a drone that flies well : controllability principles, thrust-to-weight ratio, and how it relates to the drone flight performances : speed, endurance, reactivity, etc…

Autonomous vehicle control (8h)

Reflexions on the concept of autonomy for a vehicle
Introduction to GNC (Guidance Navigation and Control) :

Guidance : Trajectory planning, obstacle sensing and avoidance
Navigation : Sensors choice integration and fusion, state estimation, event recognition
Control : flight control algorithms design and target, introduction to PID control, digital filtering, model-based control

Hands on practice on drone simulation

Gimbal, camera and image quality (2h)

Understanding the concepts related to image quality, and how they relate to drone design and flight control
Introduction to gimbal design and mechanical stabilization

Perspectives about the drone industry (2h)

Evolution of the drone market
Military industry and business
Reflexions on ethics and safetyWho Should Attend:
Ideal attendees are drone engineers, program managers, project managers, prototyping and drone designers, researchers and developers, drone pilots, and beginner

DRONE PROTOTYPING WORKSHOPS FOR CONSTRUCTING MULTOCOPTER AND FIXED-WING DRONES) MISSISSAUGA, ON
2024-02-05 - 2024-02-08
DRONE PROTOTYPING WORKSHOPS (CONSTRUCT MULTOCOPTER AND FIXED-WING DRONES)
Length: 5 days (40 hours)
Fee: CAD$3500 Drone Kits: $2000
Please contact us for further information.

Drone Engineering and Design Workshop (Mississauga, ON)
2024-02-05 - 2024-02-08
Drone Engineering and Design Workshop
Length: 4 days course (8 hour/ day)
Fee: CAD$3000
Dates: February 5 to 8, 2024
Payment: You may pay a deposit of $500 to reserve your seat (deposit 100% refundable if course does not go through) and once the course dates are confirmed you can pay the remainder. I can send you a PayPal invoice.
Location: Mississauga, ON.

DRONE MENTORSHIP PROGRAM FOR START-UPS IN TORONTO, CANADA
2024-01-08 - 2024-01-19
DRONE MENTORSHIP PROGRAM FOR START-UPS:
Length: 10 days
Fee: Please contact
The program offers entrepreneurs and early-stage founders from all over the world access to proprietary drone project development, UAS operations and UAV construction curriculum, technical hands-on training and know-how for building and designing drones, prototyping, ground station control, firmware and software, communication systems, debugging and simulations, testing and flying. Mentorship includes step-by-step process for building a complete commercial and autonomous multirotor or VTOL drone project. The UAV applications will include but are not limited to Security and Surveillance drones, agriculture drones, delivery drones (medical or food supplies), mapping and surveying drones, and drones operating in harsh and difficult environments for data gathering.
Topics:
1.1 Communications Systems
Communication systems for any type of robotics application is its core part. The attendees will learn short and long-range P2P data and video link communications between the ground control station and drone. This also includes 4G/5G communications systems. Radiofrequency propagation methods for transmission and reception of various aviation communication and data link systems will be covered.
1.2 Ground Control Station
Just like the aircraft pilots operate the airplane from the cockpit, the drone pilots and operators control the drone telemetry and flight computers from the ground. In this session, attendees will learn various types of open-source ground stations available, the best option to choose from and how to use them. The attendees will learn how to build ground station whether a cloud-based station or a smartphone application like DJI. They will learn various types of communication systems being used and how to decode them.
1.3 Drone Firmware and Software
AI-based systems are main requirement for any robotic project and product out there. This course includes Autonomous and AI-based mission planning systems for the urban, forest, and mountain areas and regeneration of environment with point cloud data. Software development will also include an obstacle avoidance system, precision landing system for indoor and outdoor applications, Simultaneous localization, and mapping for indoor and outdoor applications.
1.4 Debugging and Simulation
Like any other software on the market, there is a lot of debugging and testing involve with drone software applications. Before taking out drone for the first test flight, we test the hardware and software operations in a simulating environment. Simulation involves basic flight tests and sensors to completely autonomous flight obstacle avoidance and precision landing.
1.5 Testing
Simple laboratory test equipment will be used such as digital multimeter, power supply, and soldering station. Advanced test equipment can be used for large projects such as oscilloscopes, signal/waveform generators, and spectrum analyzers.
1.6 Drone Flying

2-WEEK, ELECTRONICS DEVICE REPAIR PROFESSIONAL CERTIFICATION COURSE, COMBO PRICE CAD$1000* PER MODULE IN SURREY, BC.
2023-12-04 - 2023-12-15
2-WEEK, ELECTRONICS DEVICE REPAIR PROFESSIONAL CERTIFICATION COURSE, COMBO PRICE CAD$1000* PER MODULE IN SURREY, BC.
OPEN YOUR REPAIR BUSINESS TODAY.
LENGTH: 2-WEEKS.
PUBLIC FEE: CAD$1000 Per Module [minimum 8 students to run the course]
PRIVATE FEE: CAD$8000 for all 4 modules [one-on-one]
SEMI PRIVATE: CAD$4000 [2 students to run the course]
TOPICS:
Module 1: Introduction to Electronics:
Device Power Management.
Device Troubleshooting, diagnostics and repair techniques.
AC/DC Current flow.
Introduction to Power Supply
Module 2: DJI and Apple Device Repair level 1 to level 3:
– DJI Smart Controllers Repair
– Apple iPhone repair
– Apple iPad repair
– Apple MacBook
– Apple Watch repair
Module 3: Apple Devices Repair at the Logic Board/ Motherboards/ IC Chip level 4:
DJI Smart Controller Repair
– Apple iPhone repair
– Apple iPad repair
– Apple MacBook repair
-Apple Watch repair
Module 4: TWO-WAY RADIOS + DMR Repair Course, Level 4
Repair, troubleshooting, diagnostics, and fault tracing for VHF/ UHF Equipment and DMR.
MATERIAL/ TOOLS: All material and tools provided in the class and included in the fee.
CERTIFICATES: AFTER COMPLETING ALL THE 4 MODULES, WTC CERTIFIED ELECTRONICS DEVICE REPAIR PROFESSIONAL CERTIFICATION WILL BE AWARDED. Wireless Training Center is an approved provider of IEEE certificates visit https://wirelesstrainingcenter.com
HOW TO REGISTER:
1. email us info@wirelesstrainingcenter.com
2. send chat message through our website. https://wirelesstrainingcenter.com/
PAYMENTS: Payment is required in full at least 15 days prior to the course start dates.
TRAINING LOCATIONS:
10318 WHALLEY BVLD., SURREY, BC, CANADA.

DRONE REPAIR PROFESSIONAL WORKSHOP, VANCOUVER, BC, CANADA
2023-12-04 - 2023-12-06
DRONE REPAIR PROFESSIONAL WORKSHOP, TORONTO, ON, CANADA
Length: 4 days
Fee: please contact (group discount offered)
Equipment: Repair training provided on Autel and DJI (Matrice 300 RTK, Mavic 3 Pro) drones. other drones can be added upon request.
Course Topics:
– How to conduct an examination and damage assessment
– How to dismantle an aircraft
– How to reassemble an aircraft
– Checking if drone working
– Troubleshooting – electronics components and mechanical parts
– Conducting calibration
– Testing
General maintenance for these units such as switching out the arms and
replacing a motor, antenna, gimbal mount, fans, propellers and landing
gears.
